ICOM

dPMR Product Showcase

Icom Inc. has been a world leader in radio communications for over 50 years. Icom continues to lead the industry with the development of digital technologies to provide the future in radio communications to the world. Icom was proud to be the first manufacturer to offer dPMR products to the market.

IDAS dPMR Hand Portables, Mobile Radios, Repeaters and Applications



Tier 1: dPMR446 TS 102 490 Compliant Products-LICENSE FREE RADIOS:

IC-F29DR:

Key Features
Pan-European License-Free Communication
Digital PMR 446 (16 channels) plus analogue PMR 446 (8 channels) available
IP67 Waterproof and Dust-tight & MIL-STD-810-G rugged
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
Common ID code for group communication
Voice Announcement Function
12 types of Ring Tone
26 hours operating time



Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:

IC-F3400DPT/DPS/DP (VHF)/IC-F4400DPT/DPS/DP (UHF)

Key Features
Small, Slim and Smart. Three front panel variants to choose
dPMR Mode 1, 2 and 3* (*requires license upgrade) compatible with mixed digital/analogue mode operation
IP68 Waterproof and Dust-tight & MIL-STD-810-G rugged
Integrated GPS receiver
Color LCD and User-friendly Interface via “flat-tile” keypad/ Multi-language profiles
1000 channels expandable to 4000 channels (with license key)
Over-the-Air-Alias (OAA)/Over-the-Air-Programming (OTAP)
Wireless Hands-Free Operation with Bluetooth®
Digital Voice Recording, data storage with SDmicro card
AES/DES Encryption with Over-the-Air-Rekeying (OTAR)
Active Noise Canceller/Audio Equalizer
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
Motion sensors and various emergency modes like man-down or lone worker
License Key for upgrades to trunking or adding other features
System Configuration File allows programming of common system parameters in Mode 3 systems



Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:

IC-F3262DT/DS (VHF)/IC-F4262DT/DS (UHF)

Key Features
dPMR Mode 1, 2 and 3 compatible with mixed digital/analogue mode operation
Compact and IP67 Waterproof & Dust-tight & MIL-STD-810-G rugged
512 channels with 128 zones
Dot-matrix, multi-function LCD
Integrated GPS receiver and man down function (Depending on the transceiver version)
800mW loud audio with BTL amplifier
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
14-pin accessory connector with BTL amplifier output
Built-in 5-Tone/CTCSS/ DTCS / BIIS 1200 signaling (FM mode)
Mode dependent scan/Priority scan
Lone worker function
Power on password
Escalating alarm
8 DTMF autodial memories
Busy channel lockout, repeater lockout and time-out-timer
Surveillance function



Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:

IC-F3202DEX (VHF)/IC-F4202DEX (UHF) ATEX Radios

Key Features
dPMR™ Mode 1 and 2 compatible with mixed digital/analogue mode operation
IECEx/ATEX Intrinsically Safe Radios with highest level ratings for use in hazardous environments (Mining, Gas and Dust)
16 channels/1W output (as per ATEX requirements)/ Up to 21 hours of operation
Distinctive blue, low resistivity casing eliminates need for case when used in hazardous environments
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
Compact and IP67 Waterproof & Dust-tight & MIL-STD-810-G



Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:

IC-F1000D (VHF)/IC-F2000D (UHF)

Key Features
dPMR™ Mode 1 and 2 compatible with mixed digital/analogue mode operation
Slim, compact and lightweight
Motion detection, stationary detection, man down and lone worker functions
IP67 waterproofing and dust-tight protection & MIL-STD-810-G rugged
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
Long-lasting battery life
Channel announcement function
Optional GPS Speaker-Microphone
DTMF autodial memories
BIIS PTT ID call and emergency call
Surveillance function
Escalating alarm
VOX capability for hands-free operation
Red emergency switch on the top panel



Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:

IC-F3102D (VHF)/IC-F4102D (UHF)

Key Features
dPMR Mode 1 and 2 Compatible with mixed digital/analogue mode operation
16 memory channels /3-color LED
Built-in 2-Tone / 5-Tone / CTCSS / DTCS signaling (FM mode)
Channel announcement function
Optional GPS speaker-microphone, HM-171GP
Operating time: 16–17.5 hours* (approx. with BP-265 battery pack)
800mW (typ.) loud speaker audio
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
Internal VOX capability for hands-free operation
IP54, dust-protection and water resistance & MIL-STD-F rugged
Lone worker function/Surveillance function
DTMF autodial
Busy channel lockout, repeater lockout and time-out-timer
Simple operation for instant communication
Radio kill, stun and revive function (RX only)
BIIS PTT ID transmission (For the analogue FM mode)


With a combination with optional separation kits, COMMANDMIC and separation cables, three types of controller configurations are available to suit almost any application or installation that may be required. The intercom function is available between controllers and/or COMMANDMIC.

Icom-Detached Controller

Icom-Dual Head Controller

COMMANDMIC™ and Detached Controller


Tier 2: dPMR TS 102 658 Compliant Products-MOBILE RADIOS:

IC-F5400DP/DPS (VHF)/IC-F6400DP/DPS (UHF)

Key Features
dPMR Mode 1, 2 and 3*(*requires license upgrade) compatible with mixed digital/analogue mode operation
Two display variants to choose from
Integrated GPS receiver (separate GPS antenna required)
IP55 Jet water and Dust protection. MIL-STD-810-G rugged
Color LCD and User-friendly Interface / Multi-language profiles
1000 channels expandable to 4000 channels (with license key)
Over-the-Air-Alias (OAA)/Over-the-Air-Programming (OTAP)
Wireless Operation with Bluetooth®
Digital Voice Recording, data storage with SDmicro card
AES/DES Encryption with Over-the-Air-Rekeying (OTAR)
Active Noise Canceller/Audio Equalizer
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
License Key for upgrades to trunking or adding other features
System Configuration File for programming common system parameters in Mode 3
Optional COMMANDMIC™ / Multiple configurations for flexible installation



Tier 2: dPMR TS 102 658 Compliant Products-MOBILE RADIOS:

IC-F5062D (VHF)/IC-F6062D (UHF)

Key Features
512 channels with 128 zones /dPMR Mode 1, 2 and 3 compatible with mixed digital/analogue mode operation
Built-in 5-Tone/CTCSS/ DTCS / BIIS 1200 signaling (FM mode)
Detachable front panel with optional RMK-3 and separation cable
Surveillance function / Escalating alarm /Power on password / Lone Worker function
IP54 dust-protection and splash resistance (Only controller and RMK-3)
MIL-STD-F rugged construction
Mode dependent scan / Priority scan
Busy channel lockout, repeater lockout and time-out-timer
Radio kill, stun and revive function
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder



Tier 2: dPMR TS 102 658 Compliant Products-MOBILE RADIOS:

IC-F5122D (VHF)/IC-F6122D (UHF)

Key Features
dPMR Mode 1 and 2 compatible with mixed digital/analogue mode operation
128 Channels with 8 zones
8-character alphanumeric display
Built-in 2-Tone / 5-Tone / CTCSS / DTCS signaling (FM mode)
D-Sub 25-pin accessory connector with optional OPC-2078
4W (typical) front mounted speaker
MIL-STD-F rugged construction
8 DTMF autodial memories
Surveillance function/Radio kill, stun and revive function (RX only)
BIIS PTT ID transmission (FM mode)
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder




Single Site (4 Channels × 1 Site Model)

Multi-site (6 Channels × 3 Site Model)

Region Wide Network (Up to 256 Sites Multi-region Connection)


Tier 2: dPMR TS 102 658 Compliant Products – dPMR Mode 3 TRUNKING CONTROLLER:

IC-FC5000E

Key Features
Dedicated control channel
Up to 32 sites multi-site trunking with CS-FC5000SCS System Control Software
Up to 256 site multi-site trunking with CS-FC5000SCS System Control Software
Four channel activation key is supplied with the IC-FC5000E
Subscriber registration
CS-FC5000 web based management software allows connection of multiple clients
CS-FC5000 supports localized language for system labels
Firmware update over an IP network
Remote reboot of the trunking controller over an IP network
Repeater anomaly detection and alert
A traffic channel can be configured as a secondary control channel




The IC-FR5100/FR6100 series has an internal space for installing an optional RF unit, UR-FR5100/UR-FR6100 series. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.


Tier 2: dPMR TS 102 658 Compliant Products-REPEATERS:

IC-FR5100/H (VHF)/IC-FR6100/H (UHF)

Key Features
dPMR Mode 1 and 2 compatible with mixed digital/analogue mode operation
dPMR Mode 3 compatible when used with IC-FC5000E controller
12-digit dot-matrix display and 32 memory channels
19-inch rack mount design, 2U height low profile design
Multiple CTCSS, DTCS tone and digital channel code decode
Output at 100% duty: IC-FR5100/FR6100: 25W/IC-FR5100H/FR6100H: 50W
±0.5ppm high stability oscillator
“2 channel in 1 box” configuration (Optional UR-FR5100/UR-FR6100 required)
Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder
5-Tone and DTMF encoder/decoder (5-Tone is for FM mode)
D-Sub 25-pin connector
Built-in inversion voice scrambler and optional UT-109R/UT-110R for higher security in FM mode
CW ID transmitter
IC-FR5200H/IC-FR6200H: High power, full duty heat sink chassis version (Export version only)






Other dPMR Related Products:

RS-MGR2 Remote System Manager Software

Key Features
The RS-MGR2 is a system management software tool for monitoring the operating status of dPMR Mode 3 trunking sites. Install the software in a server PC and client users can be accessed through a WEB browser. The RS-MGR2 provides real-time monitoring, system alerts and log search functions for the dPMR Mode 3 system.
Multi-Client: The RS-MGR2 allows creating up to 20 user accounts and giving three types of access rights to each user account.
Multi-lingual Setting: By creating a translation table, menu items can be customized to be shown in localized language. The language is selectable by user account.
E-mail Alert: The user can select error factors beforehand, and an e-mail alert can be sent to the user if any of the error factors occur or clears.
Real time monitoring: Repeater View, Repeater Status, Repeater Condition and System Connection can be monitored within the system.
Log Functions: Registration Log, Communication Log, Traffic Log and Search Log can be searched and downloaded with extensive filter settings. The collected log data can be downloaded in CSV format with a ZIP archive.





Other dPMR Related Products:

VE-PG3 RoIP Gateway

Key Features
The VE-PG3 is designed to enhance the communication coverage of a radio network and the convenience of radio usage by leveraging IP networking technology. The VE-PG3 has two modes; converter mode and bridge mode. The converter mode converts radio audio into VoIP/analog phone calls and allows interconnection between connected equipment.
Interconnect between IDAS™ dPMR™ Mode 2, analogue radio system and IP Advanced Radio System
Interconnects analogue radio to IP phone/analogue phone system
Interconnects dPMR Mode 2 and/or analogue radio to IP phone/analogue phone system
Direct dialing from radio user is possible (Limited to radios with DTMF capability)
Interconnects between analogue radio sites over the IP network
Site-to-multisite radio communication (IP multicast network required)
Mixing audio function
Cross band, cross category (e.g. dPMR UHF to air band VHF) connection
Option RC-FS10 software for virtual PC dispatch station
Public address system, siren, warning light and external equipment can be connected to the VE-PG3
The virtual serial port function for remote control connected radios or equipment from a PC over the IP network
IP router function: PPPoE/IPv6 bridge, NAT, dynamic DNS, VPN pass through, IP filter, SNMP and SYSLOG
USB flash drive connection for firmware updates and data backup





Other dPMR Related Products:

SR-VPN1 VPN Router

Key Features
The SR-VPN1, VPN router creates a VPN tunnel over the Internet and assists in building a Radio over IP communication network with easy configuration. Icom offers a variety of products which merge a radio system with an IP network and the SR-VPN1 is the best match VPN router for these Icom RoIP products.
Up to 32 VPN IPsec VPN tunnels (3DES, AES-128, AES-192 or AES-256)
IPsec wizard focuses on the basic setting items for a VPN connection, and provides simple step-by-step instructions
IPv4 multicast routing for VE-PG3
High-speed 1000BASE-T gigabit Ethernet connection
4 gigabit LAN ports with switch function
Automatic MDI/MDI-X function detects the required cable types
Dual WAN ports (main/sub) for automatic failover
USB flash drive connection for firmware updates and data backup and restore
Firmware updates also can be made via Internet connection
Supports SNMP and Syslog messages for network monitoring (An xDSL or FTTH modem is separately required for Internet connection)





Other dPMR Related Products:

RC-FS10 Remote Communicator

Key Features
The RC-FS10 is a remote communicator software for IDAS™ dPMR conventional and a VE-PG3 connected analogue radio system. It creates a virtual radio/simple dispatch station on a Windows®-based PC with the CT-24 digital voice converter and a microphone/speaker.
Up to 8 different IDAS or VE-PG3 systems can be programmed
Up to 40 function buttons are programmable, including individual call, group call, selective call, all call, status call, status polling, and so on
Caller ID/alias name, called ID/alias name and call type information are displayed on the ANI area for easy recognition
SDM (short data message), status message and DTMF code can be sent and received
Communication log is displayed and can be stored
The CT-24 digital voice converter is a USB device which converts microphone audio to the AMBE+2™ codec for the IDAS™ dPMR radio system. The remote communicator software will not work if the CT-24 is not connected.



Questions? Feel free to get in touch ...

Membership info or technical data and all else in between; we're happy to answer your queries ...

About us

The dPMR Association was established in 2007 and provides a forum for interested parties to contribute their expertise.

Subscribe

Get the latest updates